Epson EMP-7100 - Projector Control: Controls the Projector Function

56 4 • Using ELP Link II
[Projector Control]: Controls the projector function
[Computer]
[Brightness]: Adjusts the screen brightness.
[Contrast]: Adjusts the screen contrast.
[Sync]: Adjusts image flickering.
[Tracking]: Adjusts any vertical lines in the displayed images.
[Position]: Adjusts screen horizontal/vertical position.
[Color]: Adjusts the color density for each color(Red,
Green, Blue).
[Reset]: Resets all settings to their default values.
[Pattern Display]: Displays the test pattern you select.
[Close]: Exits the Projector Control screen.
[Help]: Explains functions and terminology.
[Video]
[Brightness]: Adjusts the screen brightness.
[Contrast]: Adjusts the screen contrast.
[Saturation]: Adjusts the color density.
[Tint]: Adjusts the color tint (NTSC only).
[Mode]: Selects the video signal system.
[Reset]: Resets all settings to their default values.
[Pattern Display]: Displays the test pattern you select.
[Close]: Exits the Projector Control screen.
[Help]: Explains functions and terminology.
[Sound]
[Volume]: Adjusts the volume.
[Tone]: Adjusts tone.
[Spatializer]: Adjusts sound effects.
[Reset]: Resets all settings to their default values.
[Pattern Display]: Displays the test pattern you select.
[Close]: Exits the Projector Control screen.