68 4 • Using ELP Link II
Test Pattern Setting
You can adjust the image which will be projected on the screen by
using the sample image. Select [Color Image], [Gray Scale], [Focus
Pattern] or [User File] if you need to adjust them.
If you want to use a user setting file, enter a filename directly or press
the [Refer] button and select a file from the file folder.
The user setting file is the bitmap file (*.bmp) which the user created
using a graphical application. The size of the image in the user setting
file should be 1024 × 768 pixels.
User Logo Setting
The user logo is the screen image displayed for the blank screen.
User logo memory consists of file read, user logo range setting,
designating background color, file write and downloading to the
projector.
Initial Screen for the User Logo Setting
When you select the user logo memory function, the initial screen is
displayed.
In this screen, you can display the projected image of the user logo,
download it and save it in a file.
Image Display: Displays the projected image from the projector on
the computer screen, and displays the user logo you have made on
the same screen.
To Next Page
Loading...
