60 4 • Using ELP Link II
Operating the projector control function
Customizing functions
Method 1: Select the function from the function list and drag and
drop it to the effect button you want to customize.
Method 2: Click the function from the function list and click the
effect button number you want to customize. Then
click the [Customize] button.
Executing and exiting functions
A function is executed by pressing the effect button to which you
assigned the function.
To cancel or exit the function, press the [Esc] key or the effect
button or click the right mouse button (double-click for Macintosh).
Registering functions
Registering a function saves the effect button currently customized
and the content of the details setting.
When you press the [Register] button, the registration screen appears.
Enter a name for the settings and press the [OK] button.
When you start the application again, it starts with the previous settings.
Press the [Delete] button if you want to delete the current settings.
The delete screen will appear. Select [Yes] to delete the current
settings. The name for the settings will be deleted from the function
setting box.
To Next Page
Loading...
