42 3 • Using the Menus
Using Custom Functions
You can use the Custom Menu to assign the Zoom, Preview or
Strobe function to the remote control’s Custom button.
You can assign the following functions:
1. Zoom
Zooms in or out on the center of the displayed image.
2. Preview
Displays the projection images currently being entered by each of
the input sources. The screen is divided into four quadrants.
3. Strobe
Displays images on the screen in sequence. You can preset the
number of images to be displayed and the amount of time each
image is displayed.
To customize the functions:
1. Press the [Menu] button on the projector or remote control.
2. The main menu appears.
3. Select [Custom] by using the Sync+/– buttons on the projector
or the Pointer on the remote control.
4. Press [ (Enter)] or the Left/Right Click buttons on the
remote control to call the Custom menu.
5. The Custom menu appears.
6. Select the function you want to assign to the [Custom] button on
the remote control.
7. Press [ (Enter)] or the Left/Right Click buttons on the
remote control to enter your selection.
To Next Page
Loading...
