71
5
Maintenance
The projector needs little maintenance. You should keep the lens
clean because any dirt or stains will appear on the screen. You will
also need to clean the air filter located at the bottom of the
projector periodically. It is important to keep the air filter clean
because a clogged air filter prevents proper ventilation which is
necessary to cool the projector and prevent it from overheating.
The only parts you should replace yourself are the lamp and the air
filter. If any other parts need replacing, contact your EMP-7100/
5100 dealer or qualified service personnel.
When cleaning any part of the projector, always switch off and
unplug the projector first.
◆
Warning
: Never open any of the covers on the projector except the
lamp and filter covers. Dangerous electrical voltages inside the
projector can cause severe injury. Except as specifically indicated in
this Owner’s Manual, do not attempt to service this product
yourself. Refer all servicing to qualified service personnel.
To Next Page
Loading...
