57
[Help]: Explains functions and terminology.
[Option]
[Blank To]: Selects blank states for the screen.
[Black]: A black screen appears.
[User's Logo]: A logo screen appears.
[Source Prompt]: Temporarily displays a prompt on the projector
screen to identify which source (computer or
video) is providing the image.
[Install]: Selects the type of installing.
[Rear proj]: Select when you want to project the image from
back of the screen. Flips the image right and left.
[Ceilling Mount]: Select when you want to hang the projector from
the ceiling. Flips the horizontal axis of the image,
so the projector can be turned upside down.
[View Change]: Selects the method how to switch the screen.
[Off]: Turns the settings off.
[Diagonally]: The projected image disappears from left top to
right bottom, and the switched image appears
from the left top to right bottom.
[Left to Right]: The projected image moves to right direction, and
the switched image appears from left.
[Fade In]: The projected image disappears from the edger of
the screen, and the switched image appears from
the edge.
[Lamp Hours]: Displays the lamp life.
[Reset]: Resets all settings to the default values.
[Pattern Display]: Displays the test pattern currently selected.
[Close]: Closes the projector control screen.
[Help]: Explains functions and the terminology.
[Custom]
[
Customize Function
]: Assigns functions, such as Zoom, to the effect
buttons of the remote control.
[Zoom]: Zooms (reduces/enlarges) images.
[Preview]: Displays all images being output by the external
sources which are connected to the projector.
Screen Names and Glossary
To Next Page
Loading...
