58 4 • Using ELP Link II
[Strobe]: Displays images by the number of frames and the
amount of time you specified.
[Frame Counts]: Sets the number of frames.
[Frame Times]: Sets the time interval.
[Reset]: Resets all settings to their default values.
[Pattern]: Selects the test pattern you want to display.
[Pattern Display]: Displays the test pattern you select.
[Close]: Exits the Projector Control screen.
[Help]: Explains functions and terminology.
[Test Pattern Setting]
[Pattern]: Selects the test pattern you want to display.
[Color Image]: Test pattern for color images.
[Gray Scale]: Test pattern for grayscale images, with 16 shades
of gray.
[Focus Pattern]: Test pattern for adjusting the focus.
*[User File (bmp)] : Specifies the bitmap file created with a graphical
application.
[Filename]: Specifies the name of the bitmap file.
[Refer]: You may refer files.
[Pattern Display]: Displays the test pattern you select.
[Close]: Exits the Projector Control screen.
[Help]: Explains functions and terminology.
*Macintosh:
[
User Setting File (pict)
]: Specifies the Pict type file created with a graphi-
cal application.
[User's Logo Setting]
[Image Display]: Displays the logo you created as an image
projected on the screen.
[Logo Data]: Creates and edits the logo data for blank screens.
[Edit User Logo]: Opens the User Logo Editing Screen.
[Save User Logo]: Saves the present user logo image in the logo file.
[Download]: Writes the present user logo image to the projector.
[Zoom]: Sets the zoom rate for the logo you created.
To Next Page
Loading...
