44 3 • Using the Menus
3. The screen is divided into four quadrants, each of which shows
the projection images currently being entered by each of the
input sources.
4. The projection image is switched each time the [Right Click]
button on the remote control is pressed. (Each input source
name flashes on the screen.)
5. The Preview function is closed by pressing the [Left Click]
button on the remote control. Next the image you selected in
step 4 will be displayed on the screen.
6. The Preview function is cancelled by pressing the [Custom]
button on the remote control. (The screen will revert to the
image shown before the Preview function was used.)
Strobe
1. Press the [Custom] button on the remote control.
2. The subdivided image you selected is projected on the screen at
the top left.
To Next Page
Loading...
