75
Contact your local EPSON dealer for a replacement lamp. Use only
replacement lamp part number.
◆
Note:
Be sure to always use a new projector lamp. Otherwise the
projector lamp operating time display will indicate incorrect
information.
◆
Warning:
Allow the lamp to cool down before replacing it. During
use, it becomes hot enough to burn you.
1. Switch off the projector and disconnect the power cable from the
wall socket.
2. Use a screwdriver, coin or similar object to loosen the two
retaining screws on the lamp cover. You cannot remove these
screws.
3. When the screws are loose, lift off the lamp cover.
Replacing the Lamp
lamp cover
To Next Page
Loading...
