24
Connecting to a Video Source
Projecting S-Video Images
Use a commercially-available S-Videog cable to make the connections.
Projecting Component Video Images
Use the optional component videog cable to make the connection.
"Appendices: Optional Accessories" sp.93
S-Video cable
(commercially-available)
To [S-Video] port
To S-Video output port
If more than one input source is connected to the projector at the
same time, you can use button operations to select the signals to be
projected. sp.33
Component video cable
(optional)
To component
video output
port
To [Computer1/Component Video1]
or [Computer2/Component Video2]
port (blue)
Use to connect the
projector to a commercially
available component video
cable (RCA × 3, male).
•The input source is determined automatically based on the input
signals.
Some video signals may be reproduced with different colours from
the original images. If this happens, set the input source to
"Component Video1" or "Component Video2". sp.57
•If more than one input source is connected to the projector at the
same time, you can use button operations to select the signals to be
projected. sp.33
To Next Page
Loading...
