64
Using the Configuration Menu Functions
• The "Info" menu shows the setting details for the current
image source.
• The "Lamp Hours" item appears as 0H for 0–10 hours,
and after that, it appears in units of 1 hour.
Computer/RGB Video/Component video
g
Composite video
g
/ S-Video
g
"Info" Menu
Sub-menu Function Default
Lamp
Hours
Displays the cumulative lamp operating time for both
"High Brightness" and "Low Brightness".
•When the lamp warning period is reached, the display
characters appear in red.
0H
Source Displays the input source which is currently being projected.
Input
Signal
Displays the input signal settings.
(Does not appear when the input source is composite video
or S-video.)
Resolution Displays the input resolution.
(Does not appear when the input source is composite video
or S-video.)
-
Video
Signal
Shows the video signal format.
(Not displayed for computer, RGB video or component
video images)
-
Refresh
Rateg
Displays the refresh rate.
(Does not appear when the input source is composite video
or S-video.)
-
Sync.g
Info
Informations in this menu may be required in case that you
ask for service to your dealer or the nearest address provided
at "International Warranty Conditions" section of the Safety
Instructions/World Wide Warranty Terms booklet.
(Does not appear when the input source is composite video
or S-video.)
-
To Next Page
Loading...
