90
Saving a User's Logo
You can record the image that is currently being projected as a user's logo.
PROCEDURE
Project the image that you would like to use as a
user's logo, and then press the [Menu] button.
Select "User’s Logo" from the "Extended" menu, and
then press the [Enter] button.
When a user's logo is recorded, the previous user's logo will be
erased.
•If the "User’s Logo Protect" function of "Password Protect" is set to
"ON", a message is displayed and the user's logo can not be
recorded. To record a user's logo, set "User’s Logo Protect" to
"OFF" first. sp.29
•If keystone correction or E-Zoom have been carried out, they will be
cancelled when the "User’s Logo" menu is selected.
To Next Page
Loading...
