58
EMP-S1 User’s GuideAppendices > Projector Care
f Resetting the lamp operating time
The projector has a built-in counter which keeps track of the lamp
operating time and causes the replacement warning message to be
displayed when the cumulative operating time reaches a certain point.
Therefore, the counter needs to be reset from the configuration menu, after
the lamp has been replaced with a new one.
A
Turn on the power and press the [Menu] button.
B
Select "Lamp Hours Reset" from the "Reset" menu,
using the [u][d][e] buttons.
C
Use the [l][r] buttons to select "Yes", then press the
[e] button.
The lamp operating time will be reset.
p
Please do not reset the lamp operating time except when the
lamp has been changed. Otherwise, the lamp operating time will
not be displayed correctly.
To Next Page
Loading...
Need help?
General
