You can change the processor speed temporarily by entering
one of the following commands from the numeric keypad on
your keyboard:
Ll
To select low speed, press
[‘)(~)[-I.
Ll
To select high speed, press
[ctrf)
[r)m.
(Hold down the
[F)
key and the
[T)
key simultaneously
and then press the
m
or
I-1
key on the numeric keypad.)
The speed setting remains in effect until you do the following:
Ll
Press
[ctll]
[rut)
(Delete)
Cl
Turn off the computer
CI
Change it with another keyboard command.
Using Your Computer
1-25
To Next Page
Loading...
