108
2. Disconnect any connected cables.
3. Pull down on the cover open lever and open the scanner cover.
4. Use a genuine Epson cleaning kit or a soft, moist cloth to wipe off any dust or dirt on the glass
scanning surfaces and the rollers inside the scanner cover. If the glass surface is stained with
grease or some other hard-to-remove material, use a genuine Epson cleaning kit. Use a small
amount of cleaner on the cleaning cloth to remove the stains. Be sure to wipe off all remaining liquid.
Caution: Do not spray glass cleaner directly on the scanning surfaces. Be careful not to place too
much force on the glass.
To Next Page
Loading...
