Name: Epson ET-2810 Series
Brand: Epson
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Making Wi-Fi Settings by PIN Code Setup (WPS)

You can connect to an wireless router by using a PIN code that is printed on the network status sheet. You can use

this method to set up if an wireless router is capable of WPS (Wi-Fi Protected Setup). Use a computer to enter a

PIN code into the wireless router.

Load papers.

Hold down the

button on the printer for at least seven seconds.

e network status sheet is printed.

While holding down the

button, press the button until the light and the light ash

alternately.

Use your computer to enter the PIN code (an eight digit number) printed on [WPS-PIN Code] column of the

network status sheet into the wireless router within two minutes.

When a connection is established, the

light turns on.

Note:

❏ See the documentation provided with your wireless router for details on entering a PIN code.

❏ e printer is in a connection error status when the

light and the light ash simultaneously. Aer

clearing the printer error by pressing the

button on the printer, reboot the wireless router, place it close to the

printer and try again. If it still does not work, print a network connection report and check the solution.

Related Information

& “Printing a Network Status Sheet” on page 160

& “Checking the Network Connection Status” on page 154

& “Printing a Network Connection Report” on page 155

Connecting a Smart Device and Printer Directly (Wi-Fi

Direct)

Wi-Fi Direct (Simple AP) allows you to connect a smart device directly to the printer without a wireless router and

print from the smart device.

Adding or Replacing the Computer or Devices

Connecting a Smart Device and Printer Directly (Wi

…

152

Questions and Answers:

Need help?

Do you have a question about the Epson ET-2810 Series and is the answer not in the manual?

Epson ET-2810 Series Specifications

General