EasyManuals Logo

Epson ET-2810 Series User Manual

Epson ET-2810 Series
190 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #160 background imageLoading...
Page #160 background image
Make network settings on the computer that is on the same network as the printer using the installer. You can
run it from the following website.
http://epson.sn > Setup
You can register several passwords on a wireless router that uses the WEP security type. If several passwords are
registered, check if the rst registered password is set on the printer.
Related Information
& “Printing a Network Status Sheet” on page 160
& “Making Settings for Connecting to the Computer” on page 149
Message on the Network Environment
Message Solution
The Wi-Fi environment needs to be
improved. Turn the wireless router o and
then turn it on. If the connection does not
improve, see the documentation for the
wireless router.
After moving the printer closer to the wireless router and removing any
obstacles between them, turn o the wireless router. Wait for about 10
seconds, and then turn it on. If it still does not connect, see the
documentation supplied with the wireless router.
*No more devices can be connected.
Disconnect one of the connected devices if
you want to add another one.
Computer and smart devices that can be connected simultaneously are
connected in full in the Wi-Fi Direct (Simple AP) connection. To add another
computer or smart device, disconnect one of the connected devices or
connect it to the other network rst.
You can conrm the number of wireless devices which can be connected
simultaneously and the number of connected devices by checking the
network status sheet.
Printing a Network Status Sheet
You can check the detailed network information by printing it such as the maximum number of devices you can
connect by Wi-Fi Direct (simple AP).
1.
Load papers.
2.
Hold down the
button on the printer's control panel for at least 7 seconds.
e network status sheet is printed.
Checking the Network of the Computer (Windows only)
By using the command prompt, check the connection status of the computer and the connection path to the
printer. is will lead you to solve the problems.
Adding or Replacing the Computer or Devices
>
Checking the Network Connection Status
>
Chec
160

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson ET-2810 Series and is the answer not in the manual?

Epson ET-2810 Series Specifications

General IconGeneral
Print TechnologyInkjet
ConnectivityUSB, Wi-Fi, Wi-Fi Direct
Print Resolution5760 x 1440 dpi
Scanner TypeFlatbed color image scanner
FunctionsPrint, Scan, Copy
Print Speed Black10 ppm
Print Speed Color5 ppm
Scan Resolution1200 x 2400 dpi
Paper Handling Input100 sheets
Paper Handling Output30 sheets
Duplex PrintingManual
Ink Bottles4 (Black, Cyan, Magenta, Yellow)
Ink ColorsBlack, Cyan, Magenta, Yellow
Maximum Paper SizeA4
Ink TypeEpson EcoTank ink bottles
Printing TechnologyInkjet
Copy Speed Black7.7 ppm
Copy Speed Color3.8 ppm
Paper SizesA4, A5, A6, B5
Ink Bottle Yield (Black)4, 500 pages
Ink Bottle Yield (Color)7500 pages
Dimensions375 x 347 x 179 mm
Weight11.0 lbs
Display1.44-inch color LCD

Related product manuals