8. Enter a name you can easily identify and select Finish.
Note: You will select the Projector Name when you want to connect to your projector.
9. Select the Wireless LAN menu and press Enter.
10. Select Connection Mode and press Enter.
11. Select Quick and press Enter, then press Enter again.
12. When you finish selecting settings, select Complete and follow the on-screen instructions to save
your settings and exit the menus.
13. In the list of wireless networks on your laptop or computer, select your projector's name.
Note: This is the Projector Name you entered in the projector's Basic menu.
14. Start the EasyMP Network Projection software on your laptop or computer.
15. Select Quick Connection Mode and click OK.
16. Select your projector and click Connect.
Your laptop or computer and projector are now connected over a wireless network.
Parent topic: Wireless Network Projection
53
To Next Page
Loading...
Need help?
General
