Setting Up the Start Button 3-3
3. Select your scanner from the list of installed scanners and
cameras, click the Properties button, then click the Events tab.
4. In the Scanner events list, make sure Start Button is selected.
5. To have an application open automatically when you press
the
a
Start button, select the check box next to that application
in the Send to this application window, and clear the check
boxes of all the other applications.
To have your document scanned and sent to an application
with one press of the
a
Start button, select Presto!
PageManager for EPSON, complete the steps in this section,
then proceed to “Making PageManager Settings” on page 3-4.
If you want to choose from a list of applications when you
press the
a
Start button, select the check boxes of the
applications you want.
To Next Page
Loading...
