Options 4-19
Unpacking the Automatic Document Feeder
When you unpack your Automatic Document Feeder, make sure
you have all the parts shown below and that none are damaged.
If you find any missing or damaged items, contact your EPSON
dealer immediately.
Installing the Automatic Document Feeder
Follow the steps below to install the Automatic Document Feeder
on your EPSON scanner.
1. Make sure your scanner is turned off, and unplug the
scanner’s power cord.
2. Remove your scanner’s document cover by holding the cover
behind the hinge and lifting the back of the cover straight up.
Automatic Document Feeder
installation
screws
To Next Page
Loading...
