Options 4-5
Preparing transparencies for scanning
Four film holders for scanning various types of transparencies are
included with this unit.
For instructions on loading your transparencies into the film
holders and positioning them on the scanner, go to the section
listed below that matches the type of transparency you want to
load.
Note:
Be sure to wipe the Transparency Unit glass, the scanner’s document
table, and the narrow window near the mounting bracket with a soft
cloth before scanning transparencies.
For instructions on scanning normal paper documents, see
“Scanning normal reflective documents” on page 4-16.
35-mm film strips page 4-6
Mounted slides page 4-8
120/220 film page 4-10
4 × 5 inch film page 4-12
Non-standard film sizes page 4-15
To Next Page
Loading...
