265
Power Cleaning
If you still see white or dark lines or missing nozzles in your printouts, even after cleaning the print head
several times, you can run a Power Cleaning.
If you do not see improvement after running a Power Cleaning, you must turn off the product and wait at
least 6 hours before printing a nozzle check pattern and running another Power Cleaning or Print Head
Cleaning.
Caution: Power Cleaning may cause the maintenance box to reach its capacity sooner. When the
maintenance box is full, you need to replace it to continue printing.
Note: Power Cleaning consumes more ink than Print Head Cleaning.
Power Cleaning Using the Product Control Panel
Power Cleaning Using a Computer Utility
Parent topic: Print Head Maintenance
Power Cleaning Using the Product Control Panel
You can run a Power Cleaning using the control panel on your product.
Note: After running a Power Cleaning, you must turn off the product and wait at least 6 hours before
printing a nozzle check pattern and running another Power Cleaning or Print Head Cleaning.
1. Make sure there are no errors on the LCD screen and the CD/DVD tray is not inserted for printing.
2. Load a few sheets of plain paper in Cassette 2.
3. Press the home button, if necessary.
4. Select Maintenance.
To Next Page
Loading...
