321
• After you print, the colors in your printout need time to set as the ink dries. During this time, the colors
may look different than you expect. To speed up drying time, do not stack your printouts on top of each
other.
• Your printed colors can never exactly match your on-screen colors. However, you can use a color
management system to get as close as possible. Try using the color management options in your
printer software.
• Try selecting a different Color Management setting on the More Options tab of the printer software,
and changing the Scene Correction setting to something other than Auto Correct.
• For best results, use genuine Epson paper.
• On the product control panel, change the Fix Photo setting from Auto to another option, or select
Enhance Off.
Parent topic: Solving Print Quality Problems
Related tasks
Selecting Basic Print Settings - Windows
Selecting Basic Print Settings - Mac
Selecting Additional Layout and Print Options - Windows
Managing Color - Mac
Removing and Installing Ink Cartridges
Replacing the Maintenance Box
Solving Scanning Problems
Check these solutions if you have problems scanning with your product.
Scanning Software Does Not Operate Correctly
Cannot Start Epson Scan 2
Scanning is Slow
Parent topic: Solving Problems
Scanning Software Does Not Operate Correctly
If your scanning software does not operate correctly, try these solutions:
• Make sure your computer has adequate memory and meets the system requirements for your
operating system.
• Make sure your computer is not running in a power-saving mode, such as sleep or standby. If so,
wake your system and restart your scanning software.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
