281
Caution: Do not place tape on the white flat cable inside the product; otherwise, you may damage
your product.
4. Lower the scanner unit.
5. Remove all the paper from the product.
6. Remove any memory cards or USB devices from the product.
7. Unplug the power cable.
8. Disconnect any connected cables.
9. Close all parts on the product as shown.
10. Place the product in its original packing materials, if possible, or use equivalent materials with
cushioning around the product.
Keep the product level during transportation. Be sure to remove the tape and protective material from the
ink cartridge holder before turning on your product. If print quality has declined when you print again,
clean and align the print head.
Parent topic: Cleaning and Transporting Your Product
Related concepts
Print Head Nozzle Check
To Next Page
Loading...
