90
• ID card: Place an ID card 0.2 inch (5 mm) away from the corner of the scanner glass as shown.
4. Close the document cover gently to keep your original in place.
Caution: Do not push down on the document cover or scanner glass or you may damage the
product.
Note: When placing bulky originals such as books, prevent external light from shining directly onto
the scanner glass.
Remove your originals after scanning. If you leave the originals on the scanner glass for a long time, they
may stick to the glass surface.
Parent topic: Placing Originals on the Product
Related tasks
Scanning in Epson Scan 2
Related topics
Selecting Epson ScanSmart Settings
To Next Page
Loading...
