C
Enter Copy mode from the Home menu.
D
Press + or - to set the number of copies.
E
Set the color.
F
Press d to make the copy settings.
Note:
Depending on the model, you can make copy settings in Paper and Copy Settings.
G
Select 2-Sided Copying.
H
Select the type of 2-sided copying.
Setting Description
1>1-Sided Normal copying.
1>2-Sided Two single-sided originals are printed onto each side of a single sheet of paper.
2>1-Sided* Each side of a double-sided original is printed onto one side of a single sheet of paper.
2>2-Sided* Each side of a double-sided original is printed onto each side of a single sheet of paper.
* Depending on the model, this function may not be available.
I
Make the appropriate settings for Document Orientation, Binding Direction, or Binding Margin.
Setting Description
Document Orientation Specifies the orientation of your originals.
Binding Direction* Specifies the binding direction of your originals.
Binding Margin Specifies the binding direction of your prints.
* Depending on the model, this function may not be available.
Note:
Depending on the settings for 2-Sided Copying and Layout, these menus may not be available.
J
Press x to start copying.
Layout copying
With the layout function, you can copy two single-sided originals onto a single page.
User’s Guide
Copying
41
To Next Page
Loading...
