J
Select the entry number.
K
Select Done.
L
Select Done.
M
Press x to start sending.
Sending a fax at a specified time
Follow the instructions below to send a fax at a specified time.
Note:
❏ Make sure you have set the time correctly.
& “Setting/Changing Time and Region” on page 129
❏ You can only send B&W faxes.
A
Place your original in the Automatic Document Feeder or on the scanner glass.
& “Placing Originals” on page 35
B
Enter Fax mode from the Home menu.
C
Enter a fax number. You can also use redial, speed dial, or group dial lists to select fax numbers.
D
Select Advanced Options.
E
Select Send Fax Later.
F
Select On.
G
Set the time that you want to send the fax, and then select Done.
H
Press x to start scanning. The scanned image is sent at the specified time.
Note:
If you need to cancel faxing at the time you specified, press y.
User’s Guide
Faxing
95
To Next Page
Loading...
