Buttons and Lights (2/2)
EPSON FX-880+/FX-1180+ Quick Guide
5 LF/FF button
❏ Feeds paper line by line when
pressing shortly.
❏ Ejects a single sheet or advances
continuous paper to the next
top-of-form position when held
down.
6 Micro adjust
When you hold down the Pause
button for three seconds, the printer
enters the micro adjust mode. In this
mode, you can press the LF/FF
D and
Load/Eject
U buttons to adjust the
top of form or tear off position. See
“Micro Adjust Function.”
7 Load/Eject button
❏ Loads a single sheet of paper.
❏ Ejects a single sheet of paper if a
sheet is loaded.
❏ Loads continuous paper from
the standby position.
❏ Feeds continuous paper
backward to the standby
position if a sheet is loaded.
8 Pause light
❏ On when the printer is paused.
❏ Flashes when the printer is in the
Micro Adjust mode.
9 Pause button
❏ Stops printing temporarily, and
resumes printing when pressed
again.
❏ When held down for three
seconds, enters the Micro Adjust
mode. When pressed again, exits
the Micro Adjust mode.
10 Lock
When the lock-out mode is on, the
Paper Out and Pause lights flash if
a locked button is pressed.
11 Paper Out light
❏ On when no paper is loaded in
the selected paper source or
paper is not loaded correctly.
❏ Flashes when paper has not been
fully ejected or a paper jam has
occurred.
Downloaded from: http://www.usersmanualguide.com/
To Next Page
Loading...
Need help?
General