EasyManuals Logo

Epson L220 Service Manual

Epson L220
78 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
Confidential
Safety Precautions
All safety procedures described here shall be strictly adhered to by all parties servicing and maintaining this
product.
DANGER
Strictly observe the following cautions. Failure to comply could result in serious bodily injury or loss of life.
1. Always disconnect the product from the power source and peripheral devices when servicing the product or
performing maintenance.
2. When performing works described in this manual, do not connect to a power source until instructed to do so.
Connecting to a power source causes high voltage in the power supply unit and some electronic components
even if the product power switch is off. If you need to perform the work with the power cable connected to a
power source, use extreme caution to avoid electrical shock.
WARNING
Strictly observe the following cautions. Failure to comply may lead to personal injury or loss of life.
1. Always wear protective goggles for disassembly and reassembly to protect your eyes from ink in working. If
any ink gets in your eyes, wash your eyes with clean water and consult a doctor immediately.
2. When using compressed air products; such as air duster, for cleaning during repair and maintenance, the use
of such products containing flammable gas is prohibited.
PRECAUTIONS
Strictly observe the following cautions. Failure to comply may lead to personal injury or damage of the product.
1. Repairs on Epson product should be performed only by an Epson certified repair technician.
2. No work should be performed on this product by persons unfamiliar with basic safety knowledge required for
electrician.
3. The power rating of this product is indicated on the serial number/rating plate. Never connect this product to
the power source whose voltages is different from the rated voltage.
4. Replace malfunctioning components only with those components provided or approved by Epson;
introduction of second-source ICs or other non-approved components may damage the product and void any
applicable Epson warranty.
5. The capacitors on the Main Board may be electrically charged right after the power turns off or after driving
motors which generates counter electromotive force such as when rotating the PF Roller or when moving the
CR Unit. There is a risk to damage the Main Board if the Head FFC is short-circuited with the capacitors on
the Main Board electrically charged, therefore, after the power turns off or after motors are driven, leave the
printer untouched for approximately 30 seconds to discharge the capacitors before starting disassembly/
reassembly.
6. To prevent the circuit boards from short-circuiting, be careful about the following when handling FFC or
cables.
When handling FFC, take care not to let the terminal section of FFC touch metal parts.
When connecting cables/FFC to the connectors on circuit boards, connect them straight to the connectors to avoid
slant insertion.

Other manuals for Epson L220

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson L220 and is the answer not in the manual?

Epson L220 Specifications

General IconGeneral
Print technologyInkjet
Maximum resolution5760 x 1440 DPI
Print speed (ISO/IEC 24734) mono7 ipm
Print speed (ISO/IEC 24734) color3.5 ipm
Print speed (black, normal quality, A4/US Letter)27 ppm
Print speed (color, normal quality, A4/US Letter)15 ppm
Scanner type-
Scan speed (black)2.4 ppm
Scan speed (color)9.5 ppm
Image formats supportedBMP, JPEG, TIFF
Document formats supportedPDF
Optical scanning resolution600 x 1200 DPI
Maximum copy resolution- DPI
Printing colorsBlack, Cyan, Magenta, Yellow
Country of originPhilippines
Maximum duty cycle- pages per month
Product colorBlack
Built-in displayNo
Market positioningHome & office
Paper input typePaper tray
Total input capacity- sheets
Total output capacity30 sheets
Total number of input trays1
Envelopes sizes10, C6, DL
Photo paper sizes10x15, 13x18 cm
Non-ISO print media sizesLegal (media size), Letter (media size)
ISO A-series sizes (A0...A9)A4, A5, A6
ISO B-series sizes (B0...B9)B5
Maximum ISO A-series paper sizeA4
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (off)0.3 W
Power consumption (ready)3.8 W
Power consumption (sleep)0.8 W
Power consumption (copying)12 W
Sustainability certificatesENERGY STAR
Windows operating systems supportedYes
Standard interfacesUSB
Internal memory- MB
Pallet width800 mm
Pallet height2250 mm
Pallet length1200 mm
Pallet width (UK)1000 mm
Quantity per pallet40 pc(s)
Quantity per pallet (UK)50 pc(s)
Quantity per pallet layer4 pc(s)
Quantity per pallet layer (UK)5 pc(s)
Package depth535 mm
Package width390 mm
Package height210 mm
Package weight5960 g
Quantity per pack1 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth300 mm
Width482 mm
Height145 mm

Related product manuals