Epson L385 SERIES User Manual

Related Information
& “Uninstalling Applications” on page 86
& “Installing Applications” on page 88
Other Scanning Problems
Scanning Speed Is Slow
❏ Lower the resolution, and then scan again. When the resolution is high, scanning may take some time.
❏ e scanning speed may be reduced depending on the image adjustment features in Epson Scan 2.
Related Information
& “Scanning Using Epson Scan 2” on page 56
Scanning Stops when Scanning to PDF/Multi-TIFF
❏ When scanning using Epson Scan 2, you can continuously scan up to 999 pages in PDF format and up to 200
pages in Multi-TIFF format.
❏ When scanning large volumes, we recommend scanning in grayscale.
❏ Increase the free space on the computer's hard disk. Scanning may stop if there is not enough free space.
❏ Try scanning at a lower resolution. Scanning stops if the total data size reaches the limit.
Related Information
& “Scanning Using Epson Scan 2” on page 56
Other Problems
Slight Electric Shock when Touching the Printer
If many peripherals are connected to the computer, you may feel a slight electric shock when touching the printer.
Install a ground wire to the computer that is connected to the printer.
Operation Sounds Are Loud
If operations sounds are too loud, enable Quiet Mode. Enabling this feature may reduce printing speed.
❏ Windows printer driver
Enable Quiet Mode on the Main tab in the printer driver.
User's Guide
Solving Problems
111

Epson L385 SERIES Specifications

General

Printer Type	Inkjet
Functions	Print, Scan, Copy
Print Technology	On-demand inkjet (Piezoelectric)
Print Resolution	5760 x 1440 dpi
Scanner Resolution	1200 x 2400 dpi
Dimensions (W x D x H)	482 x 300 x 145 mm
Scanner Type	Flatbed
Copy Speed (Black)	7.7 cpm
Copy Speed (Color)	3.8 ipm
Connectivity	USB
Paper Sizes	A4, A5, A6, B5
Paper Capacity	100 sheets
Ink Bottle Yield (Black)	Up to 4, 500 pages
Ink Bottle Yield (Color)	Up to 7, 500 pages
Operating Systems	Mac OS X 10.6.8 or later
Print Speed (Black)	10 ppm (ISO/IEC 24734)
Print Speed (Color)	5 ppm (ISO/IEC 24734)