Epson L385 SERIES User Manual

5. Hold the y button down for three seconds until the power light starts ashing.
Print head cleaning starts.
6. When the power light stops ashing, print a nozzle check pattern again. Repeat cleaning and printing the
pattern until all lines are printed completely.
Related Information
& “Loading Paper in the Rear Paper Feed” on page 31
Checking and Cleaning the Print Head - Windows
1. Load A4-size plain paper in the printer.
2.
Access the printer driver window.
3. Click Nozzle Check on the Maintenance tab.
4. Follow the on-screen instructions.
Related Information
& “Loading Paper in the Rear Paper Feed” on page 31
& “Windows Printer Driver” on page 78
Checking and Cleaning the Print Head - Mac OS X
1. Load A4-size plain paper in the printer.
2. Select System Preferences from the
menu > Printers & Scanners (or Print & Scan, Print & Fax), and
then select the printer.
3. Click Options & Supplies > Utility > Open Printer Utility.
4. Click Nozzle Check.
5.
Follow the on-screen instructions.
Related Information
& “Loading Paper in the Rear Paper Feed” on page 31
Replacing Ink inside the Ink Tubes
If you have not used the printer for a long time and notice banding or missing colors in the printouts, you may
need to replace the ink inside the ink tubes to solve the problem.
e
Power Ink Flushing utility allows you to
replace all of the ink inside the ink tubes.
User's Guide
Maintaining the Printer
70

Epson L385 SERIES Specifications

General

Printer Type	Inkjet
Functions	Print, Scan, Copy
Print Technology	On-demand inkjet (Piezoelectric)
Print Resolution	5760 x 1440 dpi
Scanner Resolution	1200 x 2400 dpi
Dimensions (W x D x H)	482 x 300 x 145 mm
Scanner Type	Flatbed
Copy Speed (Black)	7.7 cpm
Copy Speed (Color)	3.8 ipm
Connectivity	USB
Paper Sizes	A4, A5, A6, B5
Paper Capacity	100 sheets
Ink Bottle Yield (Black)	Up to 4, 500 pages
Ink Bottle Yield (Color)	Up to 7, 500 pages
Operating Systems	Mac OS X 10.6.8 or later
Print Speed (Black)	10 ppm (ISO/IEC 24734)
Print Speed (Color)	5 ppm (ISO/IEC 24734)