Epson L4260 Series User Manual

An Image of the Reverse Side of the Original Appears in the Copied Image
e following causes can be considered.
When scanning thin originals, images on the back may be scanned at the same time.
Solutions
Place the original on the scanner glass and then place a piece of black paper over it.
& “Placing Originals on the Scanner Glass” on page 32
The copy density setting is too high.
Solutions
Lower the copy density setting.
& “Menu Options for Copying” on page 72
Scanned Image Problems
Uneven Colors, Dirt, Spots, and so on Appear when Scanning from the Scanner
Glass
There is dust or dirt on the originals or the scanner glass.
Solutions
Remove any dust or dirt that adheres to the originals, and clean the scanner glass.
& “Cleaning the Scanner Glass” on page 90
The original was pressed with too much force.
Solutions
If you press with too much force, blurring, smudges, and spots may occur.
Do not press with too much force on the original or the document cover.
& “Placing Originals on the Scanner Glass” on page 32
Solving Problems > Printing, Copying, and Scanning Quality is Poor > Scanned Image Problems
163

Epson L4260 Series Specifications

General

Print Technology	Inkjet
Connectivity	USB, Wi-Fi, Wi-Fi Direct
Paper Handling Input	100 sheets
Paper Handling Output	30 sheets
Scanner Type	Flatbed color image scanner
Scan Resolution	1200 x 2400 dpi
Copy Function	Yes
Dimensions	375 x 347 x 187 mm
Print Resolution	5760 x 1440 dpi
Print Speed Black	10.5 ppm
Print Speed Color	5.0 ppm
Duplex Printing	Yes
Supported Paper Sizes	A4, A5, A6, B5, Envelopes
Copy Speed Black	7.7 cpm
Copy Speed Color	3.8 cpm
Mobile Printing	Email Print
Display	LCD