Epson L4260 Series User Manual

1.
Select Wi-Fi Setup on the home screen.
To select an item, use the
u d l r buttons, and then press the OK button.
2.
Select Wi-Fi (Recommended).
3.
Press the OK button to proceed.
4.
Select Others.
5.
Select PIN Code (WPS).
6.
Use your computer to enter the PIN code (an eight digit number) displayed on the printer's control panel into
the wireless router within two minutes.
Note:
See the documentation provided with your wireless router for details on entering a PIN code.
7.
Press the OK button on the printer.
Setup is complete when the setup completion message is displayed.
Note:
If connection fails, restart the wireless router, move it closer to the printer, and try again. If it still does not work, print a
connection report and check the solution.
Related Information
& “Checking the Network Connection Status” on page 178
Connecting a Smart Device and Printer Directly (Wi-Fi
Direct)
Wi-Fi Direct (Simple AP) allows you to connect a smart device directly to the printer without a wireless router and
print from the smart device.
About Wi-Fi Direct
Use this connection method when you are not using Wi-Fi at home or at the oce, or when you want to connect
the printer and the computer or smart device directly. In this mode, the printer acts as an wireless router and you
Adding or Replacing the Computer or Devices > Connecting a Smart Device and Printer Directly (Wi …
174

Epson L4260 Series Specifications

General

Print Technology	Inkjet
Connectivity	USB, Wi-Fi, Wi-Fi Direct
Paper Handling Input	100 sheets
Paper Handling Output	30 sheets
Scanner Type	Flatbed color image scanner
Scan Resolution	1200 x 2400 dpi
Copy Function	Yes
Dimensions	375 x 347 x 187 mm
Print Resolution	5760 x 1440 dpi
Print Speed Black	10.5 ppm
Print Speed Color	5.0 ppm
Duplex Printing	Yes
Supported Paper Sizes	A4, A5, A6, B5, Envelopes
Copy Speed Black	7.7 cpm
Copy Speed Color	3.8 cpm
Mobile Printing	Email Print
Display	LCD