Caution: Wear plastic gloves while refilling the ink tanks to avoid staining your hands.
1. Place a sheet of paper under the ink tank area in case of spills.
2. Turn on your product.
3. Make sure the power light is on, but not flashing.
4. If you see a message on the LCD screen indicating for you to reset the ink levels, note the ink tanks
that need refilling and press the OK button. Otherwise, select Setup > Maintenance > Reset Ink
Levels and press the start button.
5. Unhook the ink tank unit from the product and lay it down.
Note: Do not pull on the ink tubes.
6. Open the ink tank unit cover, then remove the ink tank’s cap.
155
To Next Page
Loading...
