Epson L455 - Running a Product Check

Parent topic: Solving Problems
Related concepts
Wi-Fi Protected Setup (WPS)
Related references
Paper Jam Problems
Where to Get Help
Running a Product Check
Running a product check helps you determine if your product is operating properly.
1. Disconnect any interface cables connected to your product.
2. Load plain paper in the product.
3. Press the home button, if necessary.
4. Press the arrow buttons to select Setup and press the OK button.
5. Press the arrow buttons to select Maintenance and press the OK button.
You see this screen:
6. Press the OK button.
7. Press the start button.
184