You see a screen like this:
4. Do one of the following:
• Enter the fax number using the buttons on the numeric keypad.
Note: If necessary, enter an outside line access code (such as 9) at the beginning of the fax
number. If the access code has been set up in the Line Type setting, enter the # pound sign
instead of the code.
• Press the Contactos button, select one or more recipients from the list, and press the OK
button.
• Press the Rellamar/Pausa button to redial the last dialed fax number.
5. If you need to change any fax settings, press the OK button and select your settings.
Note: If your recipient's fax machine does not print in color, your fax is automatically sent in black-
and-white.
6. Press one of the Iniciar buttons.
Note: To cancel faxing, press the Cancelar/Reiniciar button.
Your product scans your original and prompts you to place additional pages, if necessary.
After scanning your originals, your product dials the number and sends the fax.
Parent topic: Sending Faxes from the Product Control Panel
Fax Send Settings
While sending a fax, you can select these options.
167
To Next Page
Loading...
