• OS X: You can manually update the software by opening the Applications > Epson Software folder
and selecting EPSON Software Updater.
Parent topic: Solving Problems
Product Status Messages
You can often diagnose problems with your product by checking the messages on its LCD screen.
LCD screen message Condition/solution
Printer error 0xXX Turn the product off. Make sure no paper is jammed in the product, then turn
the product back on again. If the error continues, contact Epson for support.
A printer's ink pad is The ink pad is near the end of its service life. Contact Epson for support. (To
nearing the end of its continue printing, press one of the Iniciar button.)
service life.
A printer's ink pad is at The ink pad is at the end of its service life. Turn off the product and contact
the end of its service life. Epson for support.
Communication error Make sure the computer is connected to your product and your software is
installed correctly.
Paper jam Paper is jammed in the product. Remove the jammed paper and press the
OK button to clear the error.
Invalid IP address and Enter the IP address and subnet mask correctly.
subnet mask
No dial tone Make sure the phone cable is connected correctly and the phone line works.
If you connected the product to a PBX (Private Branch Exchange) phone line
or Terminal Adapter, turn off the Dial Tone Detection setting.
Recovery mode An error has occurred during firmware updating. Connect your product using
a USB cable and try updating the firmware again. If you still receive this error
message, contact Epson for support.
Parent topic: Solving Problems
Related references
Paper Jam Problems
Document Jams in the Automatic Document Feeder
Where to Get Help
217
To Next Page
Loading...
