You can continue to use the product even if one or more ink tanks are not filled all the way. However, for
the most accurate ink level monitoring, fill all the ink tanks up to the top line.
Caution: Wear plastic gloves while refilling the ink tanks to avoid staining your hands.
1. Place a sheet of paper under the ink tank area in case of spills.
2. Turn on your product.
3. Make sure the power light is on, but not flashing.
4. Press the up or down arrow button to select Setup.
5. Press the up or down arrow button to select Maintenance.
6. Press the up or down arrow button to select Reset Ink Levels.
7. Press the Iniciar Color button.
8. Unhook the ink tank unit from the product and lay it down.
Note: Do not pull the ink tubes.
187
To Next Page
Loading...
