EasyManua.ls Logo

Epson L6270 - Network Interface Specifications

Epson L6270
282 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
271
Network Interface Specifications
Wi-Fi
Standard IEEE802.11 b/g/n; IEEE802.11n available only on the 20 MHz
channel
Security WEP (64/128 bit)
WPA-PSK (TKIP)
WPA2-PSK (AES); complies with WPA2 with support for
WPA/WPA2 Personal
WPA3-SAE (AES)
Frequency band 2.4 GHz
Connection modes Infrastructure mode
Wi-Fi Direct (Simple AP); not supported for IEEE802.11b
Note: Wi-Fi Direct can be used simultaneously with Infrastructure or
Ethernet modes.
Maximum radio frequency
power transmitted
20 dBm (EIRP)
Ethernet
Standard IEEE802.3i (10BASE-T); use a category 5e or higher STP (shielded
twisted pair) cable to prevent risk of radio interference
IEEE802.3u (100BASE-TX)
IEEE802.3az (Energy Efficient Ethernet); connected device should
be IEEE802.3az compliant
Communication modes Auto, 10Mbps Full duplex, 10Mbps Half duplex, 100Mbps Full
duplex, 100Mbps Half duplex
Connector RJ-45

Table of Contents

Related product manuals