10
Top
Safety Instructions
Specications
Troubleshooting
Part Names and
Functions
Start Here
Cleaning
Initializing the
Settings
Purpose-based Index
Key Menu Index
Frame and Table Lists
Start Here
Using Label Editor
Label Editor is an application software for editing label.
When this software is installed on your computer, you can
transfer the created cable label data to the printer.
"Transferring Cable Label Data"
For how to install and operate the software, see
"Label Editor User's Guide".
1. Connect the USB cable to the printer.
2. Connect the other connector of the USB cable to
the computer.
Using alkaline batteries
You can use alkaline batteries instead
of Li-ion battery. When using alkaline
batteries, install them in the correct
orientation.
CAUTION
When you have printed continuously for 30 minutes using
alkaline batteries, leave the printer for at least one hour to allow
the batteries to cool down.
Connecting the AC adapter
Connect the AC adapter as shown below.
To Next Page
Loading...
Need help?
General
