9
Top
Safety Instructions
Specications
Troubleshooting
Part Names and
Functions
Start Here
Cleaning
Initializing the
Settings
Purpose-based Index
Key Menu Index
Frame and Table Lists
Start Here
1. Installing the Li-ion battery
Before using the printer for the rst time, charge the
Li-ion battery (C52CE97010). Read also the safety
precautions for the rechargeable battery described
previously in this manual.
For details on the handling of Li-ion battery, see
"C52CE97010 Lithium-ion Battery Pack User's Manual".
Charging the Li-ion battery
You can charge the dedicated Li-ion battery (C52CE97010)
with the printer.
To charge the battery, connect the AC adapter to
the printer with the Li-ion battery installed.
Charging error
Charging completed
Charging
Charge LED
WARNING
Be sure to use the dedicated Li-ion battery (C52CE97010) . Using a battery
other than the one specied may cause re, explosion, leakage, overheating
or other damage.
CAUTION
When disposing of used batteries, make sure to follow the regulations.
1. Open the battery cover.
2. Install the Li-ion battery in the
correct orientation.
3. Close the battery cover.
MEMO
• The Li-ion battery cannot be charged while printing.
• When the power of the charged Li-ion battery seems to run out quickly,
replace it with new ones.
• There is likely to be a charging error or battery error in the following cases.
Contact Epson customer support center.
- The charge LED ashes during charging.
- New Li-ion battery takes signicantly longer to charge than the
estimated charging time (less than 3 hours).
To Next Page
Loading...
Need help?
General
