Epson LabelWorks LW-Z700FK - Page 22

22
Top
Safety Instructions
Specications
Troubleshooting
Part Names and
Functions
Start Here
Cleaning
Initializing the
Settings
Purpose-based Index
Key Menu Index
Frame and Table Lists
Creating Special Labels
Creating Labels for Faceplate
Text can be automatically placed at the center of a block.
This enables you to easily create a label suitable for the size
of the area where it will be axed.
Label length
Blocks number
Block Block
1. Press .
2. Enter the label length and then press
.
Setting range: 1 to 99.9 cm
3. Enter the blocks number and then press
.
In this example, we will enter "2".
Setting range: 1 to 50
4. Select the orientation with
/ and then press
.
In this example, we will select "Hori.".
Hori.
Vert.1
Vert.2
5. Enter the text.
6. Press
.