Check that the paper-thickness lever is set
comctly
for the
paper you are using. See page 2-21.
The position of your paper supply may be preventing the
paper
from
feeding stmight. Make sure the paper supply
k
not
obstructed by a cable or some other object. Make sure that your
paper supply k positioned withIn
1
meter
(3.28
feet) of the
printer.
Check that the
holes
on the sides of the paper are aligned with
each other. Also, make sure the
sprocl&
units are locked and
their covers are closed.
Check that paper size and thickness are within the
s@ed
range.
See
page 7-4.
Continous
paper does
not
e$ect
properly.
Thepagektoolang.Tearoff~epaperand~~itfromthe
printer. Only use paper that k within the
s@fied
length
range.
See
page
76
When a print command is sent from the
arnpue
the platen
rotates but the
cut-sheet feeder does not feed the paper.
Thecut-sheetfeedermaybeinanTectlyinstalled.Removethe
cut-sheetleederandinstaIlitasdesaibedinChapter4.
CheckthatthepaperreleaseleverkinthesingMwxt
position. See page 2-2
Thepa~tlewrsmaybepulledforward.Pushbackonthe
paper-set levers.
Papermaybejammedneartheprinthead.
TheremaybeonIyanesheetfettinthebm.Addmorepaper.
To Next Page
Loading...
