Using Continuous Paper
......................
2-7
Tractor position and available paper paths
........
2-7
Changing
tractor positions
.................
2-8
Installing in the push-tractor position-Installing
in the pull-tractor position
Loading continuous paper with the push tractor
..... 2-10
Removing continuous paper from the push tractor.
...
2-13
Loading continuous paper with the pull tractor
.....
2-14
Removing continuous paper from the pull tractor
.... 2-18
Switching Between Continuous Paper and Single Sheets
...
2-18
Switching to single sheets
..................
2-18
Switching to continuous paper
...............
2-20
Printing on Special Paper
......................
2-20
Paper-thickness lever
.....................
2-21
Multi-part forms
........................
2-22
Labels. .. .. .. ... .. .. ... ... ... ... ... ... ... ... ... ... .. . . .. .. . ... .... 2-22
Envelopes.
...........................
2-24
Chapter 3
Using the Printer
Control Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
Lights.............................................................................3-2
Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3
Other control-panel features . . . . . . . . . . . . . . . . . 3-5
DIP Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6
Changing a DIP-switch setting . . . . . . . . . . . . . . . 3-6
DIP-switch tables . . . . . . . . . . . . . . . . . . . . . . . 3-7
DIP-switch functions . . . . . . ._ . . . . . . . . . . . . . . 3-9
International character
sets-Character tables-
Print direction-Printer mode-Input buffer
capacity-Skip-over-perforation--
Continuous-paper page length-Tear off-Auto
line feed
Micro Feed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-13
Using micro feed . . . . . . . . . . . . . . . . . . . . . . . 3-13
Adjusting the loading position . . . . . . . . . . . . . . . .3-14
xii
To Next Page
Loading...
