Epson LQ-680 - Page 27

1
Setting Up the Printer
1-9
R4C4590
Rev. D
A5 size SETUP.FM
3/30/01 Pass 1
R
Proof Sign-off:
Takahashi, Kono _______
Takahashi _______
Hoadley, Courtier _______
3. The print head should be in the replacement position
indicated by an indentation in the front metal plate, as shown
below.
If it is not, close the printer cover and turn the printer on to
move the print head to the replacement position. Wait a few
seconds, then turn the printer off again and open the printer
cover.
c
Caution:
Following the steps below while the printer is turned on can
damage the printer.