1-10
Setting Up the Printer
R4C4590
Rev. D
A5 size SETUP.FM
3/30/01 Pass 1
L
Proof Sign-off:
Takahashi, Kono _______
Takahashi _______
Hoadley, Courtier _______
4. If a used ribbon cartridge is already installed, squeeze the tabs
on each side of the cartridge, and pull the cartridge out of the
printer. Properly dispose the used ribbon and cartridge.
5. Turn the ribbon-tightening knob on the new cartridge in the
direction of the arrow to take up any slack in the ribbon.
6. Hold the ribbon cartridge with the exposed ribbon down and
the ribbon-tightening knob facing you, and guide the ribbon
under the print head. Then snap the cartridge into place so
that the tabs on both sides of the cartridge fit into the notches
in the cartridge holder.
To Next Page
Loading...
