Epson LX-300+ Supplementary Guide

2
About Your EPSON LX-300+
This booklet briefly describes the new features provided by the
EPSON
LX-300+. It is intended for LX-300 users who are
upgrading to the LX-300+. If you are not familiar with the
LX-300, please see the LX-300+ User’s Guide for detailed
instructions on using the printer.
Your new LX-300+ printer is very similar to the LX-300, only
better. It’s faster, more reliable, and accommodates more copies
per multi-part form (1 original plus 4 copies). It is backward
compatible with the LX-300, so you should not have any
problems using it with your current software.
Be sure to consult the LX-300+ User’s Guide for setup instructions
and detailed information about your printer.
New Specifications
This table summarizes the basic specification differences
between the two models.
Function LX-300 LX-300+
Printing speed NLQ (10 cpi): 44 cps
(uni-d)
Draft (10 cpi): 220 cps
High speed draft
(10 cpi): not available
High speed draft
(12 cpi): not available
NLQ (10 cpi): 56 cps
(bi-d)
Draft (10 cpi): 225 cps
High speed draft
(10 cpi): 300 cps
High speed draft
(12 cpi): 337 cps
Copy capability 1 + 2 1 + 4
Printable area
Top margin
Bottom margin
5.3 mm (.2 in)
9 mm (.35 in)
4.2 mm (.17 in)
4.2 mm (.17 in)
Built-in fonts Roman, Sans Serif,
Draft, Draft
condensed
Roman, Roman
condensed, Sans Serif,
Sans Serif condensed,
Draft, Draft condensed

Epson LX-300+ Specifications

General

Emulation	Epson ESC/P, IBM PPDS
Print Method	9-pin, impact dot matrix
Interface	Parallel
Paper Handling	Friction feed
Dimensions	366 x 275 x 159 mm
Paper Width	4 - 10 inches