4
Printer Software
The LX-300+ comes with printer software on a CD-ROM which
includes a printer driver for Microsoft
®
Windows
®
and some
helpful utilities. You do not need to install this driver if you are
happy with the driver(s) you are currently using for your
LX-300. The LX-300+ printer hardware is backward compatible
with ESC/P software drivers.
If you decide to install the software, you can take advantage of
the following features:
❏ A printer driver which lets you control printing.
❏ The EPSON Status Monitor 3 utility for Windows versions
95, 98, 2000, and NT 4.0 (or later). The Status Monitor
displays information about the printer’s status and lets you
know if there is a problem with a print job.
❏ The EPSON Remote! utility, a DOS-based printer setup
utility that lets you change printer default settings from your
monitor screen. (This provides an alternative way to change
the default settings as described on page 10.)
See the LX-300+ User’s Guide for instructions on installing and
using the printer software.
To Next Page
Loading...
Need help?
General
