11
Note: Load a maximum of 20 sheets at a time. Load
your paper glossy or whiter side up to prevent smearing.
5 Store any unused paper in the original package
and keep it flat in a dry area to prevent curling.
Note: When you need more paper, order a PictureMate
Print Pack. See page 56 for more information.
6 Attach the output tray.
Using the P On Button
You can use the P On button on the remote control
to place PictureMate in standby mode and save
energy.
1 Press the P On button on the side of PictureMate
to turn it on. The power light turns green.
Note: If you are not using PictureMate, a slideshow of
your photos begins automatically after 3 minutes. Press
any button to return to the function you were using.
2 When you’re finished using PictureMate, press the
P On button on the remote control. The power
light turns orange.
3 Press the P On button on the remote control or
on the side of the printer to return PictureMate to
full operation.
Note: To turn PictureMate off completely, use the P On
button on the side of the printer.
To Next Page
Loading...
