10
Removing Your Memory Card
When you are ready to remove a memory card, first
make sure the memory card light is not flashing.
Caution: Do not remove a card while the memory card light is
flashing; you may lose photos on your card.
Pull the card out of the slot.
Loading Paper
Caution: Don’t load plain paper; this may damage PictureMate.
1 Open the paper support.
2 Slide out the edge guides.
3 Create a stack of up to 20 sheets of paper and
separate the sheets slightly by fanning them.
4 Place your paper into the slot between the edge
guides with the glossy or whiter side up. Slide the
edge guides inward slightly.
Load glossy or
whiter side up
To Next Page
Loading...
